Details
The best-selling guitar hanger is the original String Swing guitar hanger created back in 1983, with a few minor improvements. The new design, known as the “Guitar Keeper”, has a deep cradle design that prevents the guitar from being improperly placed into the hanger. This ultimately provides a safer hanger for your instrument, as the guitar needs to be lifted 2 inches and brought forward to be removed. The wood blocks that our guitar holders attach to are made of authentic North American hardwood that is handcrafted by local Amish. Natural wood color may vary. The new Keeper design is great for guitars with single or uneven heels.
The deep, pivoting yoke prevents the guitar from being improperly placed in its hanger and allows for Bass, Electric and Acoustic guitar headstocks to be cradled perfectly while still hanging straight. This yoke may be too narrow for some classical and bass guitars, therefore we recommend purchasing the original CC01. The yoke that is included on this hanger is the SDY03. In this case, we recommend measuring the width of your guitar neck to choose the appropriate yoke.
INSTALLATION INSTRUCTIONS:
Choose a location on the wall for your hanger. Press screws through the mounting holes of the block. Use a phillips screwdriver to drive the screws into the wall. If a wall stud is not found, use these pilot holes to install the drywall anchors. To install the anchors, use the screwdriver to push and turn them clockwise until flush with the wall. Then, remount the hanger with the screws into the drywall anchors.
The weight limit for use of this hanger is 15lbs. or less.
DO NOT REUSE DRYWALL ANCHORS FOR REMOUNTING THE HANGER
DISCLAIMER: We are not responsible for the method in which the purchaser attaches the hanger to the wall, or the strength of the wall material it is placed on.
The deep, pivoting yoke prevents the guitar from being improperly placed in its hanger and allows for Bass, Electric and Acoustic guitar headstocks to be cradled perfectly while still hanging straight. This yoke may be too narrow for some classical and bass guitars, therefore we recommend purchasing the original CC01. The yoke that is included on this hanger is the SDY03. In this case, we recommend measuring the width of your guitar neck to choose the appropriate yoke.
- Trusted by over 10 million guitars around the world and backed with a lifetime warranty.
- Made in the USA
- Backed with a structural lifetime warranty
- Mounting Hardware Included
INSTALLATION INSTRUCTIONS:
Choose a location on the wall for your hanger. Press screws through the mounting holes of the block. Use a phillips screwdriver to drive the screws into the wall. If a wall stud is not found, use these pilot holes to install the drywall anchors. To install the anchors, use the screwdriver to push and turn them clockwise until flush with the wall. Then, remount the hanger with the screws into the drywall anchors.
The weight limit for use of this hanger is 15lbs. or less.
DO NOT REUSE DRYWALL ANCHORS FOR REMOUNTING THE HANGER
DISCLAIMER: We are not responsible for the method in which the purchaser attaches the hanger to the wall, or the strength of the wall material it is placed on.