Details
Wood grain/coloring can vary from listing photos.
The original String Swing guitar wall mount. The CC01 guitar hanger has the same original design, created by the founder of String Swing back in 1983. This guitar holder remains one of the best selling String Swing guitar mounts to date. As the best option for classical guitars, this guitar hook features a pivoting yoke to securely cradle the guitar's headstock. It also allows adequate space between the guitar and the wall for acoustics and electrics. Each guitar wall hanger is built of steel and hand welded for quality assurance. The wood blocks that the guitar holders are attached to are made of authentic North American hardwood that is handcrafted by local Amish.
Wall Installation Instructions:
Chose a locations on the wall for your hanger. Press screws through the mounting holes of the block. Use a phillips screwdriver to drive the screws into the wall. If a wall stud is not found, use these pilot holes to install the drywall anchors. To install the anchors, use the screwdriver to push & turn them clockwise until flush with the wall. Then, remount the hanger with the screws into the drywall anchors. (If mounting to a concrete or brick surface, please do not use enclosed hardware. Appropriate masonry screws can be purchased at your local hardware store.)
The weight limit for use of these hangers is 15 lbs. or less.
DO NOT REUSE DRYWALL ANCHORS FOR REMOUNTING THE HANGER
DISCLAIMER: We are not responsible for the method in which the purchaser attaches the hanger into the wall, or the strength of the wall material it is placed on. We recommend that the finish on the neck of the instrument be fully cured before resting it on any hanger.
The original String Swing guitar wall mount. The CC01 guitar hanger has the same original design, created by the founder of String Swing back in 1983. This guitar holder remains one of the best selling String Swing guitar mounts to date. As the best option for classical guitars, this guitar hook features a pivoting yoke to securely cradle the guitar's headstock. It also allows adequate space between the guitar and the wall for acoustics and electrics. Each guitar wall hanger is built of steel and hand welded for quality assurance. The wood blocks that the guitar holders are attached to are made of authentic North American hardwood that is handcrafted by local Amish.
- Made in the USA
- Backed with a structural lifetime warranty
- Mounting Hardware Included
Wall Installation Instructions:
Chose a locations on the wall for your hanger. Press screws through the mounting holes of the block. Use a phillips screwdriver to drive the screws into the wall. If a wall stud is not found, use these pilot holes to install the drywall anchors. To install the anchors, use the screwdriver to push & turn them clockwise until flush with the wall. Then, remount the hanger with the screws into the drywall anchors. (If mounting to a concrete or brick surface, please do not use enclosed hardware. Appropriate masonry screws can be purchased at your local hardware store.)
The weight limit for use of these hangers is 15 lbs. or less.
DO NOT REUSE DRYWALL ANCHORS FOR REMOUNTING THE HANGER
DISCLAIMER: We are not responsible for the method in which the purchaser attaches the hanger into the wall, or the strength of the wall material it is placed on. We recommend that the finish on the neck of the instrument be fully cured before resting it on any hanger.